- Rapping installation: common bag dust collectors are equipped with arm rapping and lifting off-hook rapping. The dust removal framework is prone to rapping hammers and anvils falling apart during operation, which affects the dust removal rate. Because of the rapping task, the bolts are often loose and smooth, such as the dust removal framework causing the rapping effect.
- Flue gas conditioning: The unevenness of the dust removal rate of the dust removal frame dry kiln tail electrostatic precipitator largely depends on the function of the humidification tower. In order to comply with the flue gas conditions that change frequently, the reflux nozzles with large changes in spray water quality should be selected for the reflux humidification tower. The dust removal framework can not only widen the limitation of atomization and conditioning, but also make the nozzle diameter relatively large to reduce Requirements for the cleanliness of water. On this basis, a proportional-regulated electric controller is added to the water-return water spray system to control and save the water volume to implement active water control, and the dust-removing framework can complete the constant quenching and tempering of the flue gas without forming an increase. Wet tower humidity.
The dust collector skeleton is the main accessory of the bag filter and the rib of the dust bag. Its quality directly affects the filtering state and service life of the dust bag and the dust removal effect of the bag filter. Correct use and cleaning of the dust collector skeleton will help improve the use rate and service life of the dust collector skeleton and reduce the maintenance cost of the skeleton. Generally, the service life of the dust collector frame is 1-3 years. We must check frequently and clean up the dust in time to avoid subsequent failures. If we can clean up the dust attached to the dust collector frame in time, not only can the air permeability of the dust collector frame be restored, and the pressure loss can be reduced, but the amount of gas passed by the dust collector can be stabilized within the range required by the working conditions.