1 Precipitator equipment shall be provided with hand operation and maintenance, and make a record run. Managers should fully grasp the precipitator principle, performance, structure, conditions of use, identify problems in time, to ensure the normal operation of production systems. 2 Reducer mechanical moving parts, ash and other devices should be required to oiling and oil changes, especially the cylinder piston is not short of oil, to the oil cup must be regularly refuel, we found irregularities should be immediately removed. 3 Air intakes to take gray, indicating that the bag has been damaged, stop the maintenance of high temperature exhaust fan and fan, open the dust collector cover, such as found in the mouth of the bag there is fouling, it shows that the bag has been damaged and must be replaced. 4 Compressed air system air filters to regular sewage, air bag drain valve to the lowest point of the timing of drainage, there is also the timing of the air tank drainage. 5 Control valve to be used by the person responsible for maintenance, periodic pulse valve solenoid valve and inspect, repair, replacement. Seal 6 Overhaul Manhole on, if damaged or aging, should be replaced. After the system stops the process, should be maintained precipitator and exhaust fan 7 Stop to continue working for some time to remove the moisture and dust inside the device. It must be noted that, in the dust collector stops working, must be repeated on the dust collector cleaning operation (either manually cleaning) the dust bag l removed, to prevent moisture, paste bag. 8 Precipitator In normal operation, the ash discharge device can not be stopped, otherwise the dust accumulated inside the hopper into the bag overflowing chamber, forcing the precipitator downtime.
