The probability of side leakage of the filter bag during the operation of the bag filter is relatively small, which will effectively ensure the quality of the filtration to a certain extent, and the equipment can carry greater working pressure and pressure loss during operation. Small, the entire equipment is low in operating costs and has significant energy savings.
The bag filter has a large amount of processing and a small volume, and the entire device has a large volume of dirt. Based on the working principle and structure of the bag filter system, the device is very convenient and quick in the process of replacing the filter bag when it is used. And filter-free cleaning, save time and labor.
The structure of the bag filter is very reasonable and its circulation ability is strong. In the process of operation, it is very simple and has many advantages. The side leakage probability of the whole device, especially the filter bag, is small, so that it can be guaranteed to a certain extent. The filtering accuracy of the equipment, and can quickly change the filter bag.
The internal and external surfaces of the bag filter are mainly mechanically sandblasted to solve the problem. The filtration method adopted during the use of the equipment is the side-in measurement method. The liquid medium is filtered or pumped through the pressure in the pipeline. In the bag filter body, the liquid medium to be filtered is filtered through electropolishing punching holes to support the filter bag of the blue support, and the changed solids and liquids reach the result that the liquid medium is filtered.
Bag filter in the case of stable liquid inlet and outlet pressure, the filter quality is closely related to the pressure difference within the filter bag, if the pressure difference is too large, so that it can be explained to some extent that the filter bag filter aperture has been blocked , so that the filtering speed drops. Therefore, we recommend that when the bag filter starts to work, the pressure difference should be checked regularly, and the time for replacing the filter bag is determined by the pressure difference shown by the front and rear pressure gauges. Generally, the filter bag can withstand a pressure of 0.5-1 Kg/cm2 (0.05- Around 0.1Mpa), when the pressure difference reaches this range, the filter bag should be replaced in time to avoid the filter bag breaking and affecting the filtering effect.