The incubator should be cleaned once a week. During the cleaning process, the corona pole support insulator and the quartz sleeve should be inspected for damage or creepage. If there is damage, it should be replaced in time.
The oil level of the gear unit of each rapping device and the ash conveying ash conveying device should be checked once a week, and the lubricating oil should be appropriately replenished.
After the refueling machine is refueling for one week, replace the new oil and flush the internal oil. After that, replace the lubricating oil every 6 months. The lubricating oil can be mechanical oil. Industrial gear oil is recommended.
The corona pole is rotated once a week to rotate the porcelain coupling shaft. During the cleaning process, it is necessary to check whether there is any damage, creepage, etc. If there is damage, it should be replaced in time.
Check the electric precipitator housing once a year, check the connection between the door and the ground, and ensure that the resistance value is less than 4Ω.
Select the appropriate rapping program or another programming change program based on the gray level of the pole row.
Check the insulation of the electrostatic precipitator every 6 months. If damage is found, repair it in time.
The amount of flue gas, dust concentration and pressure drop at the inlet and outlet of the electrostatic precipitator are measured once a year to analyze the changes in the performance of the electric precipitator.
If the electrostatic precipitator works for more than 3 months, it shall use the process to produce parking opportunities to inspect and maintain the internal components of the electrostatic precipitator.
