Q:How is the process of Baghouse skeleton silicone ? A:Bag cage silicone spray process in detail 1 would have been processed in addition to fuel tank bag cage was immersed for 15 minutes in order to remove surface oil bag cage. 2. Remove from the oil tank into the bag cage cleaning bath to soak clean, the purpose is to remove the bag cage degreasers. 3. Remove the bags from the cleaning tank into the cage groove rust rust treatment, the purpose is to remove the bag metal oxide layer on the cage, enhanced adsorption force. 4. From the rust came out to take the bone into the groove groove phosphate phosphating treatment, the purpose is to enhance the adhesion bag cage surface. 5. Deal bag cage into the oven, set the temperature of 100 ℃, drying carried out for 20-30 minutes, remove the bag of water cage on purpose, keeping the body dry bag cage. 6. Remove the bag cage, the modulation good silicone spray evenly on the surface of the bag cage. Coating thickness 60μm ~ 100μm. 7. Spray a good bag cage into the oven, set the temperature of 220 ℃, 120 minutes of baking. After holding 200 ℃, heat-set for 30 minutes. The natural cooling bag cage, bag cage to complete the silicone coating process. Silicone adhesive force between the strongest thickness 60-70μm.
