1. Equipment introduction:
The filter separator is mainly used to remove droplets and solid impurities in natural gas to protect downstream equipment. It is mostly used for gas filtration of natural gas purification stations and protection and filtration of long-distance pipeline compressors.
2. Features, uses and technical parameters:
2.1 Features:
The equipment adopts quick-open blinds, and single can replace the filter.
Easy to install and easy to operate.
The filter consists of a housing, a filter element, a meter, and the like.
After the medium enters the filter, it enters the first-stage filter coalescing element, passes the filter element from the outside to the inside, removes impurities and moisture, and then enters the secondary filter separation element to further remove impurities and moisture, and the medium flows out of the outlet. The first and second lower parts have their own water storage chambers for storing the intercepted droplets and impurities. When the pressure difference of the device or the use time of the filter element reaches a set value, the replacement of the filter element is performed.
2.2 Uses:
Used to remove the droplets and solid particles contained in natural gas.
2.3 Technical parameters
Filtration accuracy: 1 ~ 3μm;
Initial filter pressure drop: <10Kpa
Working pressure: -1 ~ 15Mpa;
Working temperature: 0 ~ 80 °C;
Electrical working voltage: AC220/DC24V;
Explosion-proof grade : Ex ia(d) IIBT4 (optional)
Shell material: carbon steel, stainless steel
Filter material: composite.