GENERAL DESCRIPTION:
Frequent cleaning is the key to high air to cloth filter ratios, constant differential pressure and the ability to handle heavy particulate loads. A reduced collector housing interstitial velocity is another advantage. For these reasons the dust Collector is particularly well suited to process services such as dryer exhausts, kiln stacks, pneumatic conveyor receivers, grinding systems and other sensitive systems where constant air volume is critical.
Filter Technology Ltd collectors are custom designed for each application. Customer must refer to cover sheet and general arrangement drawings for proper orientation of equipment and accessories.
OPERATING PRINCIPLE:
A.Solids laden air or gasses enter unit at hopper of housing inlet.
B.Air passes through filter media.
C.Solids are retained on filter surface.
D.Filtered air is exhausted through clean air plenum.
E.Cleaning cycle consists of a momentary blast of 100 psig compressed air.
1 – Momentarily taking row of bags off stream through pressure reversal;
2 – Flexing filter media;
3 – Solids are released to fall to hopper and through unload system.
F.Cycle timer is adjusted to maintain approximately 4” ∆ P across filter bags.
Equipment should be installed at site location by qualified contractor. Accessories, fans, unload systems and controls are appropriate to customer’s requirement.