In the process of operation, the dust bag can not be used to work with the damaged bag, otherwise it will accelerate the scrapping of the dust collector to a certain extent. When the individual dust bag is damaged in a small area, the old bag can be used. Or new filter cloth of the same material will be used to fill the hole. The hole filling method is to use silicone rubber compound to bond, as long as the adhesive’s use temperature, chemical properties and process conditions can be adapted.
When the dust bag is in operation, when most of the bags are damaged, the dust bag should be completely replaced. The replacement of the dust filter bag is best performed when the dust filter stops working. In such cases, it is necessary to effectively clear the dust bag. When the gray controller is closed, the top manhole door is opened, and the dust filter bag can be disassembled. When disassembling, the bag cage is taken out first, and then the spring coil of the cloth bag is pinched into a concave shape.
Before the effective installation of its new bag, it is necessary to effectively clean the dust on the flower plate hole. Its dust removal frame is an ideal equipment for purification of industrial exhaust gas such as thermal power generation, metallurgy and non-ferrous metals. On the basis of summing up many years of production experience, we continue to draw on advanced technologies at home and abroad. Produce dust bags suitable for coal-fired power plants.
When the dust bag is in use, each task class must review the ash discharge condition in the ash bucket of the baghouse to ensure that the dust accumulation of the ash bucket does not exceed one third of the height of the ash bucket. To a certain extent, the dust bag needs to supervise the discharge at any time. If the sight of the chimney emerging from ash emission is found, the smoke and breath will be indicated. If there is a situation where the bag falls out, it shall be promptly investigated and resolved.
The current status of the dust bag is to stop the review of the position of the pulse jet tube and to protect it from excess, so that it can be effectively prevented from forming a pulse nozzle core and a dust bag due to the looseness of the pulse jet tube, the position of the pulse tube, and the connection of the drop. The core of the hole is biased, resulting in dust bag protection.