The water treatment bag filter is a device with novel structure, small volume, and simple and flexible operation during use. The entire product is very efficient, energy-saving, sealed, and flexible, and the water treatment bag filter is more adaptable. Use filter equipment, it is widely used in chemical, coating, ink, food and other industries. In particular, the side leakage rate of the filter bag is small, the accuracy of filtration can be accurately ensured, and the filter bag can be quickly and easily replaced.
The structure of the water treatment bag filter is mainly composed of four sets of rocker ring bolts to tightly seal the top cover and the filter cartridge during the design process, which will make the filter more resistant to extremely high filtration pressure. And water hammer pressure shock.
The water treatment bag filter is mainly composed of a filter bag, a filter basket, and a filter cartridge in the process of manufacturing. The structure of the whole device is compact and simple, and the liquid to be filtered will effectively pass through it during use. The inlet of the filter enters, flows into the filter bag, and is intercepted by the filter bag and then flows out of the filter outlet.
In the process of designing the inlet and outlet of the water treatment bag filter, under normal circumstances it will effectively adopt the side-in and bottom-out mode, which will be more convenient for cleaning to a certain extent, and the replacement of the filter bag is simple and quick.
1. Close the inlet valve first and open the exhaust valve so that the pressure inside the filter falls to atmospheric pressure.
2. Open the four sets of head bolts on the top cover and open the top cover.
3. Open the retaining ring of the fixed filter bag, put forward the plugged filter bag, put on a new filter bag.
4. Close the top cover and tighten the four sets of ring bolts. In the fifth step, open the inlet valve and close the exhaust valve when the exhaust valve has liquid flowing out.