During the operation of the bag filter, it is necessary to frequently check whether the connection pipe of the bag filter is firm and whether there is leakage and damage. If the bag filter does not open the bag, the remaining liquid may be sprayed. , causing fluid loss and personal injury.
The inlet and outlet valves of the bag filter are sealed. When the operation is inspected, it is checked whether the pressure gauge determines that the internal pressure is zero, and the bag filter should be separated from the pipe system. Open the drain valve and keep the remaining liquid in the bag filter running through the drain valve.
The bag filter needs to open the bag filter cover properly during operation, remove the cap, lift the cover, turn the angle, and check the Ο seal and the filter on the grate groove. The ring is deformed, scratched or cracked, or there is a problem with the Ο-type seal joint, and new accessories should be replaced.
When the bag filter is used, replace the filter bag. If using a sewing bag, fold the filter bag so that the filtering effect of the filter bag can be improved. Put the filter bag so that the mouth of the filter bag matches the metal mesh ring. Hold the lid handle with one hand, grasp the other end of the lid with one hand, close the bag filter tip, and slowly lower it, press it naturally against the ring and the filter bag ring, and even force the lid bolt.
The bag filter can tolerate more work pressure to a certain extent, the pressure loss is small, the operation cost is low, and the energy saving effect is obvious. The leakage probability of the side of the filter bag is small, the quality of the filter is effectively guaranteed, the multi-bag filtration processing capacity is large, the volume is small, and the sewage volume is large.