The filter tank of the bag filter is usually installed on the top of the aquarium when it is installed, as long as the water in the aquarium is continuously extracted from the underwater submersible pump. This can be very good. The expulsion of different filter substances, but also can make the filtered water continue to flow back into the tank.
Bag filters are often well placed in front of the aquarium, so that the wavy filter can be placed in the bottom of the tank. Of course, we must also install the filter above the aquarium. The bottom sand can be used well as a filter material. Then we also need to connect the air when conducting the conduit. Of course, we must use the air pump to send air, and constantly promote the circulation of water.
The bag filters can all be described in the form of cans, so that the activated carbon or filter cotton and other water can be properly adjusted. Of course, the water pump can be located in the top of the tank, by inserting the tube, and then pumping water from the bottom of the tank into the tank, and when it is filtered, it can be returned to the tank.
The bag filter has many advantages such as good sealability, strong flow ability, and easy operation when used. Especially, the filter bag has a small side leakage probability, can accurately guarantee the filtration accuracy, and can quickly change the filter bag, resulting in an operating cost. decline. The inner and outer surfaces of the filter are mechanically sandblasted to solve the problem and are average and easy to clean.