Ready to warn: After the lid is opened, the falling lid will hurt your hand.
1, First of all, please confirm whether the accessories required for bag filter system installation have been prepared:
① bag filter body ② O-ring
③ metal mesh ④ filter bag ⑤ pressure gauge 1 only
2, Check O-ring and O-shaped groove on the filter, if O-ring deformation, scratches or rupture, or O-ring joints have problems, please replace the new parts.
When installing and installing, please follow the steps as below:
1, the bag filter to be placed in the filter station, connecting the import and export of flange or tube teeth, to be fixed; stuffy blocking vent, or exhaust valve configuration. Jacket-type insulation heat source.
2, the metal mesh into the bag filter gently, so that the network collar and bag filter mouth match.
3, place the filter bag so that the mouth of the filter bag ring and the metal mesh collar match. Note: If using a sewn filter bag, fold the seamed edges of the filter bag into place to increase the filter effect of the sewn filter bag.
4, the O-ring into the O-shaped groove, O-ring can not be distorted or deformed, multi-bag filter buckle bag pressure ring.
5, holding the lid handle in one hand, the other end of the cover with one hand (multi-bag filter turn the top hand wheel), the cover at the mouth of the bag filter, slowly down, natural pressure on the O-type seal Circle and filter bag ring mouth.
6, the cover alignment, while tightening the two diagonal caps, all caps one by one tighten (with a short rod into the rings tight).
7, close the bag filter installed in the top of the exhaust valve.
8, please check the connection pipe is solid; work pressure is within the allowable range.
9, open the output valve. Open the heat source into the valve, the filter temperature rose to the specified temperature.
10, open the input valve, let the liquid flow slowly and fill the filter to prevent the liquid suddenly impact the filter bag, resulting in rupture, and then observe whether there is leakage. If no leaks, you can start filtering.
