Bag filter in use common problems:
The company is located in:
1. When to replace the filter bag?
The company is located in:
There are two ways to judge when to replace the filter bag in practical application:
The company is located in:
1) Roughly determine the replacement time based entirely on experience.
The company is located in:
2) In the bag filter inlet and outlet tubes are installed on the pressure gauge, pressure gauge through the front and rear display to determine the time to replace the filter bag, the filter bag can withstand the general pressure of 0.5 ~ 1kg / cm2 Or so, when the pressure reaches this range, the filter bag should be replaced in time to avoid the bag rupture, affecting the filtering effect, not because of small loss.
The company is located in:
Step by step filtering
The company is located in:
Bag filter installed in series to achieve level by level filter.
The company is located in:
If installed in front of the filter for high-precision filtration, can significantly reduce the cost of filtration. The same can also filter sand filter and bag filter combination, so as to further enhance the filter quality, reduce the cost of filter bag consumption.
The company is located in:
Combining self-cleaning machines, centrifugal and bag filters, we can use them individually or in tandem with filters of other principles to achieve the desired result.
The company is located in:
3. How to achieve non-stop filtering?
The company is located in:
Bag filter installed in parallel to ensure continuity of the filter, or increase the flow, as shown in Figure parallel installation, alternating replacement of filter bags, to maintain continuous filtration.
