Summer and winter are seasons where air conditioning is used more frequently. Before using air conditioners, first clean the air conditioning filter to avoid the dust or bacteria inside being blown out. Generally, the air-conditioning filter is disassembled by the after-sales personnel. However, if we have mastered the correct disassembly method, we can disassemble it ourselves, which will be more convenient.
Disassembly method:
1. Before disassembling the air conditioner filter, first open the air conditioner casing. Generally, the air conditioner casing has two small card slots to be stuck, and the outer cover can be gently opened.
2, After opening the air conditioner cover, there will often be two buckles inside,and they must be also gently opened to allow the cover to open completely. Then it’s time to take the filter.The filter is easier to take.It is just stuck by a few card slots. First push the filter up and the lower will end off the card slot, then gently pull the filter down .
3. After removing the air conditioning filter, some air conditioners have black particles that are reinforced and filtered. This should be taken separately and cleaned and dried.
4. Then carefully rinse the filter with water several times, brush it with a soft brush several times, and finally dry it in a ventilated place until it is dry. Do not bend the air conditioning filter during cleaning. Although it is flexible, the plastic can not withstand bending.
According to the above method, the air conditioner filter can be easily disassembled. It must be cleaned after disassembly. Remember to use a hard brush. Finally, dry it in a well-ventilated place. Do not place it in direct sunlight at this time. The mesh is plastic in nature, and direct oxidation will oxidize it.