- Check before the operation of the single bag filter dust collector system
- Scavenging each line for 10-15 minutes before running.
- Ensure that the compressed air line is unblocked, adjust the air pressure to 0.5 MPa, and then supply air to the equipment air storage bag.
- Open the air bag drain valve and close the oil and water.
- Check each blowing mechanism one by one to see if there is any water or air leakage.
2.Check and confirm that the gas path is clear.
- The filter bag material is: 500g/m2 acupuncture. Change once a year.
- If there is smoke in the exhaust chimney, the bag is damaged. If the bag is damaged, replace it.
- When the precipitator performs large-scale maintenance work, the system must be stopped.
- Always check the ash storage ash.
3. Maintenance of single bag filter in normal operation
- Check whether the fan is running smoothly and has abnormal noise. If an abnormality is found, effective measures should be taken quickly and reported in time.
- In the normal operation of the equipment, control according to technical parameters, and make a record.
- Check if the display of each meter is normal and the position of each switch is correct.
- Check the operation of the power distribution cabinet and control box for abnormal noise, odor, smoke, etc.
- Check whether the functions of the components of the dust collector are intact, whether the pipeline is unblocked, and whether there are defects.
4. Inspection and maintenance of the pipeline of the single bag filter system
- Regularly inspect the pipeline for ash damage and timely clean up and repair.
- Regularly remove the ash from the ash silo.