In the design of high temperature dust bag inlet concentration, temperature, wind speed are all certain technical requirements. Reduce energy consumption and make it more adaptable. During operation, the working status of various parts of the screw conveyor should be checked regularly. When the loose fasteners are refastened, special attention should be paid to whether the screws between the connecting shafts are dropped or loosened. If such phenomena are found, stop the maintenance immediately. . During the installation, be sure to carefully insert the frame into the filter bag. If there is a large resistance, you must pull it back upwards and then gently lower it. If the resistance is still high, repeat the operation until it is able to Drop it easily.
When the production system is reformed, it may be necessary to increase the wind speed and increase the amount of dust. At this time, the capacity of the dust collector and possible consequences should be taken into consideration. Make the pulse valve open and close faster. It reduces the consumption of the pulse jet system itself, thereby reducing the pressure of the required air source. To prevent the silo from falling into the foreign matter and jamming the unloader impeller and burning the motor, a dry overload protection clutch is used instead. Safety products in previous products.