During the process of using the bag filter, the lid must not be opened under the pressure of the device, so that the remaining liquid in the device may be ejected, which will cause the loss of liquid and personnel. Close the output valve when there is pressure at the outlet of the closed input valve.
The bag filter can effectively open its exhaust valve after confirming that the pipe connected to its exhaust valve has been connected to its safe place or the suction port, so that it can effectively prevent its liquid from being exposed to its staff and the surrounding environment. Causes damage and pollution.
The bag filter needs to check its pressure gauge effectively. When it is determined that its internal pressure is 0, the bag filter at this time should be separated from the pipe system, with the drain valve, confirm that the waste fluid is connected to the recovery place, and open. Drain valve; the remaining fluid in the bag filter is drained through the drain valve and the drain valve is closed. This discharge work can be done in conjunction with pressurization.
The probability of side leakage of the bag filter during use is very small, so that the quality of the filtration is ensured, and the equipment can carry a greater working pressure to some extent. The pressure loss of the entire equipment is low and the operating cost is low. The energy saving effect of the entire device is obvious.
The filter accuracy of the bag filter is continuously increasing. The processing capacity of the equipment is large, the volume is small, and the volume of the dirt is large. Based on the working principle and structure of the bag filter system, the filter bag is convenient and quick when the filter bag is replaced, and the filter is free from cleaning. At the same time, the filter bag filter can be reused after repeated cleaning to save costs.