Bag filter is very powerful for solving sewage power when it is used. The task of the equipment is when the water enters through the outlet. It takes the lead through the coarse filter to filter out the impurities of the larger particles and then arrives at the fine filter. The bag filter solves the problem of poor shock and shock resistance of existing bag filters.
The technical solution of the bag filter includes a hopper connected with the box. The box of the product is provided with a feeding inlet and an outlet, and the ash bucket is provided with a discharging outlet at the lower end. The box of the product is connected with the feeding inlet through the air intake device. The air intake device of the product includes an upper guide box body and a lower guide groove inclined toward the wall surface of the box body. The guide groove of the product is communicated with the tank body through the guide hole on the wall surface of the box body, and the guide box body of the product is communicated. The upper end face communicates with the feed port.
The bag filter has simple structure, simple operation, good filtering effect, no need to strengthen the structure of the device itself, and achieves the requirements of impact prevention and shock absorption and the service life of the device is long. The bag support frame of the filter bag includes a tube body with two ends open. The upper opening of the tube body of the product is uniformly distributed with a plurality of radial inclined blades, and a grid hole is arranged on the wall surface of the tube body of the product.
The bag filter will be placed inside during the use of the filter bag. When it is used, the filter liquid needs to pass through the support frame of the bag to effectively relieve and distribute the filter liquid so that the liquid to be filtered is evenly adhered to the filter bag. The surface of the filter bag improves the filtration flow rate and filtration efficiency. This product can reduce the impact of the liquid to be filtered on the bag body and the bottom of the filter bag and prevent the bottom of the filter bag from being broken.
After working for a period of time, the bag filter should clear the impurities in the filter core in time to relieve the increase in the pressure of the filter caused by the accumulation of impurities, resulting in a decrease in the flow rate. In addition, the filter core components in the filter must not be used repeatedly; at the same time, if any stainless steel wire mesh that has been deformed or damaged is discovered, it should be replaced immediately.