The core part of the filter is the core part. The filter core is mainly composed of a filter frame and a stainless steel wire mesh. The latter is a consumable part and needs special protection when used. When the filter is working for a period of time, the filter is Some impurities are precipitated in the core, the pressure drop will increase, and the flow rate will decrease. It is necessary to remove the impurities in the filter core in time.
In the process of cleaning impurities, the filter must pay special attention to the fact that the stainless steel wire mesh on the filter core cannot be deformed or damaged, otherwise, the filter is installed again, the purity of the filtered medium cannot meet the design requirements, and the compressor, the pump, and the instrument Equipment will be destroyed.
In the process of using the filter, if the stainless steel wire mesh is found to be deformed or damaged, it needs to be replaced immediately. When the precision filter works for a period of time, the filter element will contain a certain amount of impurities, and the pressure drop will increase. The flow rate will drop. It is necessary to remove the impurities in the filter in time and clean the filter element.
During the process of removing impurities in the filter, special attention should be paid to the precision filter element, and no deformation or damage will occur. Otherwise, the filter element will be replaced. The purity of the filtered medium cannot meet the design requirements. Some precision filter elements cannot be used multiple times. Repeated use, such as bag filter, polypropylene filter and so on.
The filter will effectively use the activated carbon, anthracite, and homogeneous quartz sand as the effective filter material according to the characteristics of raw water quality and the purification treatment requirements. The filtering effect is good and the water quality is stable. The equipment has fewer connection pipes, easy operation, and easy management and maintenance.