The bag filter is a very professional liquid filtration device when used, and can effectively remove different size particles in the liquid when used, so that the purposes of liquid filtration, purification, separation, and recovery can be achieved.
The bag filter is mainly composed of three parts supporting the basket, the filter bag and the filter container during the manufacturing process. During the process of using the device, the liquid will directly enter the side of the filter container or the liquid inlet below. The filter bag, which is supported by the basket, is flushed into the filter bag. The filter bag is deployed due to the impact of the liquid and the uniform pressure surface, so that the liquid material is uniformly distributed on the inner surface of the entire filter bag.
The bag filter will effectively penetrate the liquid of the filter bag along the wall of the metal support basket. When used, the filter outlet is discharged through the liquid outlet at the bottom of the filter, so that the particulate impurities filtered out are trapped in the filter bag, and then they are effectively completed. The process of filtration.
When the bag filter is in use, in order to maintain high efficiency of the filter and filter accuracy and ensure that the downstream liquid is not contaminated, the equipment should be shut down after running for a period of time. During use, the filter end cap needs to be opened, the retentate and the filter bag Remove and replace the new filter bag together. The replacement cycle depends on the actual situation.
The bag filter is very simple in the process of operation. In use, only the filter bag with the required fineness grade is effectively installed in the filter cartridge, and the O-type seal is effectively inspected during use. Whether the circle is in good condition, and then tighten the annular bolt of the cartridge cover, you can work.