The industrial filter cloth is mainly made of synthetic fiber in the process of production, mainly including polyester, nylon, polypropylene and vinylon. Among them, polypropylene and polyester are the two most commonly used ones. The industrial filter cloth also includes a variety of metal material woven mesh such as stainless steel wire, nickel wire, brass wire.
The method of weaving industrial filter cloth is mainly used for satin weaving, twill weaving, plain weaving, and non-woven acupuncture in the process of operation. The entire product has high precision, high load, acid resistance, alkali resistance, and wear resistance. Temperature, etc., rich in special filtering performance.
Industrial filter cloth in the use of the filter cloth should not be too loose or too tight, mainly because too loose it will be easy to dust, if too easy to pull bad, under normal circumstances, the old and new filter bags can not be mixed Installed, so that it can be to a certain extent to avoid damage to the normal operation of the device.
The industrial filter cloth that is replaced normally needs to be blown with compressed air first, and then used to check if there are any holes. After the holes are repaired, they are left to be replaced. If the filter bag is stuck with dust, rinse with water and leave it to dry after it has dried.
Industrial filter cloth should be stopped when the filter cake has a suitable thickness, and then work after unloading the cake, which can extend the service life of the filter bag. When changing the filter bag, the filter bag can not be directly buckled with a hard object, and the auxiliary force applied on the filter bag can be pulled up.