1. Filter introduction:
Sintered mesh is a new type of filter material with higher strength and overall steel after being pressed by special laminations of multi-layer wire braided mesh and sintered in a vacuum furnace, which overcomes the low strength and poor rigidity of the wire mesh. The insufficiency of the mesh is easy to deform and unstable, and its comprehensive performance is obviously higher than the metal powder sintering, ceramics, metal fiber sintered felt and other products.
2. Parameters and features:
2.1 Technical parameters
Filtration accuracy: 2～60μm
Working temperature: -20～600°C
Maximum pressure difference: 3.2MPa
Number of floors: 2 to 7 floors
2.2 Materials:
Standard material is stainless steel 316L, stainless steel 304L can also be used, other materials can be customized according to customer requirements.
2.3 Features:
The standard sintered network structure consists of a protective layer, an accuracy control layer, a dispersion layer and a multi-layer reinforcement layer;
After high-strength metal mesh is sintered, it has extremely high mechanical strength and compressive strength;
Cleanability Due to the excellent surface filtration structure with countercurrent cleaning effect, it is easy to clean.
3. Uses:
High temperature, corrosion liquid and catalyst filtration in the petrochemical industry;
Filtration and purification of various polymer solutions in the chemical fiber industry;
Filtration separation of various catalysts in the pharmaceutical industry;
For gas distribution, liquid bed orifice material;
For high pressure backwash oil filters.