PP melt-blown filter is a non-toxic and odorless polypropylene particles. It is made of heat-melting, spinning, traction and shaping. It has high filtration precision, high flow rate, small pressure difference, large amount of pollutants, and volume. Small, high pressure resistance, corrosion resistance and other characteristics.
PP cotton filter model:
PPF (polypropylene melt blown filter) – 10 (length 10″) – 5 (filter accuracy 5μm)
PPF-P (Polypropylene melt-blown filter element with frame) – 10 (length 10″) – 5 (filter accuracy 5μm)
PPF-D (Polypropylene big fat meltblown filter) – 10 (length 10″) – 5 (filter accuracy 5μm)
3. Specifications: (Special specifications can be customized)
Length 5′′ 10′′ 20′′ 30′′ 40′′ 50′′ 60′′
Outer diameter (±1mm) 60 to 115 mm
Inner diameter (±1mm) 28, 30 mm
PP cotton filter main performance:
a. Accuracy and flow
Filtration Accuracy (μm) 1 3 5 10 20 30 50
Initial accuracy (μm) 10-15 15-25 25-35 30-40 35-50 40-60 60-90
The largest particle (μm) 15 25 35 40 50 60 90
Flow (L/min) 10 14 17 20 24 28 32
Note: The length of the tested filter element is 10′′, the differential pressure is 0.02 MPa, and the test medium is clear water. Other filter elements and so on.
b. Maximum pressure: ≤ 0.5MPa; maximum pressure drop: 0.2MPa.
c. Maximum working temperature: ≤ 60°C.
PP cotton filter use
one. Electronics, power industry: pure water, gas, electricity crossing, printed line version and so on.
two. Chemicals, petrochemicals: Solvents, coatings, magnetic pulp, detergents, liquid waxes, etc.
three. Pharmaceutical and pharmaceutical industry: hospital water, pharmaceutical injections, liquids, etc.
four. Food industry: food, beverages, drinking water, alcohol, etc.
Absorbent cotton filter
Product Description: The filter is a deep filter core, used for low viscosity, low impurity quality filtration. The filter is made by degreased cotton (TZM) precisely wrapped around a porous stainless steel frame at a specific density. Outer sparse dense honeycomb structure can effectively remove suspended solids, particles, rust and other debris in the fluid, with very good filtration characteristics. Widely used in tap water, beverage, industrial water, domestic water, electroplating liquid, chemical liquid, oil, paint and other filtration.
Features: high temperature resistance, large flow, good filtration performance.
Uses: Suitable for high temperature, alkali resistance.
PP cotton filter product use
Food and beverage industry: pure water, mineral water, beverage water, alcohol, edible oil, etc.
Electronic industry: electroplating, circuit board, organic solution, electronic pure water, etc.
Petrochemical industry: Chemicals, inks, paints, coatings, cosmetics, oil field water, etc.
The wire wound filter is a deep filter core, used for low-viscosity, low-impurity filtration, it is composed of textile fiber lines (PP threads, absorbent cotton threads, glass fiber threads) in various specific ways in the inner core (polypropylene, Two kinds of stainless steel winding. Mainly used in self-industry water, beverage, domestic water, industrial water, filtration, electroplating liquid, chemical liquid, oil, paint filtration
The folding micropore filter adopts polypropylene (Polypropylene) thermal spray fiber membrane, nylon (Nylonb), polytetrafluoroethylene (PTFE) microporous filter membrane, etc., which are made of filter media and have a small size and a large filter area. , high precision features. The filtration accuracy can range from 0.1um to 60um. Both the filter cover seal and the integral structure connection are hot melt bonded. The filter joints are of three types commonly used internationally: 222 joints, 226 joints, and flat mouths. All products undergo a rigorous and complete test before leaving the factory to ensure the stable performance of the product. Specifications: Flow pressure drop curve (take 10″ polypropylene membrane filter as an example) Uses: Food industry: Beverages, beer, mineral water, etc. Electronics industry: Pure water equipments from manufacturers of semiconductors, electronics, picture tubes, etc. ,Prefiltration of reverse osmosis water.Pharmaceutical industry:Biochemical preparations, filtration of blood products, and sterilization of gases, etc. Chemical industry: Filtration of general chemical raw materials such as organic solvents, electroplating, etc. Petroleum industry: Downhole water injection, natural gas , fuel oil filtration, purification, etc.