Single bag filter dust removal power need to solve the problem:
Single bag filter dust collector cleaning power source comes from compressed air. Compressed air equipment usually uses oil-free compressor or ordinary compressor refueling water removal device. However, in order to guarantee the quality of compressed air, design the compressed air station as close as possible to the dust collector. Avoid vapor condensation in the pipeline, and use a dedicated compressed air station for large bag filters to ensure the stability of the compressed air pressure.
If it is not possible to design a dedicated air compressor station or the air compressor station is not close to the precipitator, a compressed air storage tank should be provided near the stand-alone bag precipitator equipment. In this way, the source pressure of the compressed air can be stabilized, and on the other hand, the compressed air line can be generated. The condensate can also be periodically discharged through the valve at the bottom of the compressed air storage tank to ensure that the condensate generated on the cleaning gas line of the pulse bag filter can also be periodically discharged through the valve at the bottom of the tank to ensure the quality of the dust supply for the pulse dust collector.
When selecting the pulse valve, in order to ensure the service performance and service life of the equipment, the single bag filter can be operated efficiently and stably for a long time. The pulse valve of the single bag filter must have a five-year warranty period. The injection volume of the pulse valve must meet the requirements for designing the number of filter bags. The working pressure range should be large enough to use high quality products. The design should master the pulse valve diaphragm stroke, valve port size, valve interface size, etc. in order to be able to There are several. At the same time pay attention to the pulse valve control requirements, such as electronic control, pneumatic control, explosion-proof and so on.