CFS Series Sanitary Liquid Filter

CFS series is a single-core filter series in the sanitary liquid filter, it is a high-end sanitary filter with small flow rate. The filter design is fully complies with the requirements of sanitation and GMP. It is a high-end liquid filter for life science applications. The structure has no hygienic dead ends and is easy to clean. The liquid is drained thoroughly and there is no concern about residual liquid. Electrolytic polishing can also be selected at the same time as mechanical polishing, and the polishing accuracy can reach up to 0. 3um.

  • Max Operating Pressure: 0.6MPa.
  • Size of Filter Cartidge: 10″/120″ /30″.
  • Max Operating Temperaures: 1500℃.
  • Inlet & Outlet: DINANSVBSP/NPT.
  • Polishing Type: Mirror polishing; Electrolytic polishing.
  • Polishing Accuracy: Mirror polishing; Electrolylic polishing.

Description

Product Features

  • Ultra high polishing grade, with an inner wall of up to 0.3 μ M; The outer wall reaches 0.4 μ m. Absolute hygiene level polishing, all series can choose electrolytic polishing.
  • Venting Valve and drain valve: the threaded sleeve and the pagoda joint are disengaged,and the connected hose will no longer rotate when deflated and liquid is discharged.
  • Effectively increase the inner diameter of the vent hole and the drain hole, and can be connected to 8mm pipe to increase efficiency:
  • Using a new segmented clamp: 20% higher pressure resistance than ordinary,bear higher pressure.
  • Strong clamp can be used when the pressure requirement is high , perfectly seal PTFE and the maximum pressure can up to 1.0Mpa.
  • The legs of the filter are reinforced threads, not easy to slip and can withstand 100 times of use. And an adjustable screw is installed at the bottom of the support foot, which can adjust the height of the filter for easy use.

Schematic Diagram

Model

Model Length of

cartridge

A(m/m) B(m/m) C(m/m) D(m/m) E(m/m) Weight
1RS1 10″ 0101.6 79 81 345 205 4.5kg
1RS2 20″ 0101.6 79 81 595 205 6.0kg
1RS3 30″ 0101.6 79 81 845 205 7.5kg

Sizing List

ES CFS 1 30 E 10 D 25 C5 E 33
Ever spring Housing type NO.of filter cartridge size of filter cartridge material Design pressure Flange standard inlet&outlet specs cartridge gasket material Internal  and external surface treatment
Sanitary Liquid filter Single cart- ridge series 1 10-10” E: S30408  0.6:0.6MPa D:DIN/GB Flange Standard 15-1/2″ CF-DOE  E-EPDM Internal:3-Polishing

4-Eletro-polished  Finishing

20-20’’ SL:S31603 10:1.0MPa A:ANSI Flange Standard 20-3/4″ C5-222+Fin V-Viton External:3-Polishing

4-Eletro-polished  Finishing

30-30’’ C:CARON STEEL 16:1.6MPa J:JIS(Japan)Flange Standard 25-1″ C7-226 S-Silicone
40-40’’ TA:Titanium alloy B:BSP Thread standard B- -NBR
B:Duplex stainless steel N: NPT Thread standard
V :V-band clamp
C: Tri Welded pipe
S : Sanitary thread standard
 T:Quick installation clamp

 

Typical Applications

  • Electronics.
  • High-purity water terminal filtration.
  • Food and beverage filtration.
  • Liquor\Wine canning filtration.
  • High-purity water terminal filtration.
  • Fine chemical product filtration.
  • Petroleum,Automobile.
  • Paper making.
  • Pharmacy.