FMS high temperature dust bag is a new high temperature product, dust removal accessories FMS dust bag has high temperature resistance, high strength, acid and alkali corrosion resistance, wear resistance, flex resistance and other characteristics; and suitable for 150-210 °C, 250–300 °C And other temperature range of high temperature corrosion series products. Compared with the glass fiber dust bag, the dust removal fitting FMS dust removal bag has the characteristics of good abrasion resistance, bending resistance and peel strength, can bear high dust filtration load, the filtration speed can reach 1.0m/min or more, and the running resistance is low. Compared with synthetic chemical fiber high temperature dust bag filter material, it overcomes the weakness of chemical fiber filter material such as unstable stretching, large deformation, low temperature resistance, and poor corrosion resistance; better dimensional stability and strength. Widely used in steel, non-ferrous metallurgy, chemical industry, carbon black, building materials, electricity and other departments. Because of the extensive use of FMS dust bags, there are very strict requirements for the production and processing of FMS dust bags. But for people who do not know where to choose a good FMS dust bag, our professional staff will analyze it:
A good FMS dust bag must have the following:
1, FMS dust bag selection must pass.
2, FMS dust bag production and processing to pass. Must be three-wire sewing, the mouth should use three-thread sewing, hot melt products can not be used, although the appearance of hot melt products beautiful appearance, but the temperature can not reach, prone to bag damage phenomenon.
3, FMS dust bags on the mouth of the ring must use high-temperature rising circle, if you do not use high-temperature rose circle, prone to bag falling phenomenon.
4, choose a good FMS dust bag to choose the regular manufacturers, because the rise of the dust bag is rolled in the dust bag inside, the appearance is not visible, only the choice of regular manufacturers, quality will be guaranteed.
Technical parameters of conventional FMS dust bag:
Weight : >950g/m2
Material : E-glass fiber/P84
Thickness : 2.4mm-3.0mm
Air volume : 8-15m3/m2·min
Longitudinal pull force: >2100N/5×20cm
Latitude pull : >2200N/5×20cm
Longitudinal elongation : <10%
Latitude extension: <10%
Working temperature: ≤260°C
After treatment : Teflon coating, film
