First, prepare the materials and tools for measuring the filter cloth, soft braided rope and tape measure. Then let the belt filter press run normally and adjust the speed of the motor to a low speed. When the metal joint running to the filter belt of the filter press appears, tie the braided rope long enough to the metal joint of the filter cloth. Let the braided rope rotate with the operation of the filter cloth.
Then, when the braided rope rotates with the filter belt for one week, that is to say, when the metal joint appears, mark the braided rope. This is to measure the length of the braided rope around the filter cloth, and it is also the length of the filter cloth. The same method measures the length of another filter belt. When measuring, pay attention to the braided rope during the operation of the filter cloth. The end of the hand holding the braided rope is slightly energized when the filter cloth is running, so that the braided rope is tight, otherwise the measured length error is relatively large, so be careful not to The length of the metal joint that is ignored, the metal joint is measured within the length of the filter belt when measuring.